Ship-2-Shore Fluid Thin Film Coatings Liquid Corrosion and Rust Control Systems PRODUCTS

	PRODUCT	SIZE
	Ship-2-Shore PLID Aerosol in cases of 12	180g Aerosol
	Ship-2-Shore PLID Bulk	4 Litres
		20 Litres
	Ship-2-Shore INDUSTRIAL	350g
		1 Litre
		20 Litres
COVERAGE: 1 litre of PLID BULK or INDUSTRIAL will cover approximately 424 square feet at 1 mil. thick.

SHIPPING

The Purchaser pays for Shipping FOB Victoria BC Canada, and the order will be shipped upon bank clearance.

To place an order or obtain pricing, please contact us.

Up to Products

Payment can be made by Cheque, Bank Draft, Money Order, Master Card or Visa.

Ship-2-Shore FORMATS

Ship-2-Shore rust inhibitors
are available in 3 formats:

PLID AEROSOL is thin and highly penetrating. Note: the propellant is flammable.
PLID BULK is more viscous, longer lasting, but slower penetrating.
INDUSTRIAL is the most used format and is used as a cable dress, an anchor chain lube/inhibitor and in bilge's and other aggressive environments. It is easily sprayed.

Ship-2-Shore PLID

PLID stands for Penetrant,
Lubricant, Inhibitor, Dielectric.

Using Fluid Thin Film Coating (FTFC) PLID displaces water and most other electrolytes shutting down corrosion, but it doesn't stop there, it also contains oxygen scavengers that remove oxygen from the surface of the metal shutting down rust in two ways.

PLID also contains an extreme pressure lubricant making it an excellent lube for chains, fishing reels or anything needing a light extreme pressure lube.
The strong electromagnetic attraction to metal makes it an excellent penetrating fluid for loosening rusty fasteners.
With a dielectric of 38,000 volts, it can be used on electrical devices of all kinds, including communication equipment, switches, electric panels and in electric motors, generators and alternators, and on gold contacts in hand held phones.
Use on all types of metal.
Use to prevent electrolysis between different metals.
Sunk an engine? Use PLID for filling and flushing then put back in service.
Sunk a radio or electronics? Soak in a bucket of PLID. Replacement of speakers, microphone and LEDs are commonly all that is needed to put it back in service fifteen dollars later.

Many users say PLID performs magic.

Ship-2-Shore INDUSTRIAL

Extra thick and tough. Apply with a brush or warm for spraying.
Not highly penetrating but very tough .
Will perform in very wet areas such as cutlass bearings on ship's drive shafts.
Stays on in rain and snow.
It's being used on ship's anchor chains and in chain lockers. It's being used on the inside of tug boats and barges where the only preparation before application is hand scaling or light blasting.
Bridge expansion rollers are an excellent application for INDUSTRIAL as is the trellis work, support beams and expansion joints.
Used together, INDUSTRIAL and PLID make a great team.
Use PLID to penetrate deep crevices "shutting down the rust", then apply INDUSTRIAL for long term protection.
Do you want your vessel bilge's bright? Needle gun, then apply a rust converter, then an inexpensive porous primer, then a top coat with INDUSTRIAL.
Seal them in with a hard coating for ultimate longevity. Apply PLID to all cracks, seams and crevices allowing it to penetrate over night. Wipe off any excess top coat with a oil base paint. When the hard coatings fail and water or oxygen ingress, no problem, Ship-2-shore will prevent any rusting under the surface, which will protect the structural integrity of the unit, and prevent rust stains from marring the cosmetic appearance, extending the life of the paint indefinitely.
Where scaling is difficult or too costly, just pour in a generous amount of Ship-2-shore PLID

If you find all this too good to be true,
then you join a long list of past skeptics
who now give it their highest endorsement.

Up to Products